Controller
| PowerVoltage | AC100～AC240V（50／60Hz） | |
| Output Voltage | DC24V 3A | |
| Startup mode | Discharge mode or Memory mode | |
| 吐出Driving Time | 1 to 99 seconds / 10 to 990 seconds | |
| Interval | Time setting: | 1 to 99 minutes / 1 to 99 hours / 1.5 to 99.5 hours |
| Count setting: | 10 to 990 count / 1,000 to 99,000 count | |
| Alarm Output | A・BContact | |
| Alarm OutputContact capacity | AC250V-5A DC24V-5A（inductive load · maximum） | |
| Input | Pressure switch connected Lüve Connect count limit switch when using count |
|
| Model | Part Number |
|---|---|
| VUC-II | 300460 |
Caution
If it is set to "0", an error will be displayed.
Be sure to put MGL or GPL in the system.
If you do not use MGL or GPL, please use no error detection.
When using EGMPump (decompression device with solenoid valve), set the operation timer within 7 minutes and 30 seconds.
Directions for use
- Please do not apply a strong shock such as dropping.
Dimensions
